Air Cooled Aftercooler HAA
Series/CAD | Applicable compressor | Air flow capacity L/min (ANR) |
HAA | 7.5 to 37 kW | 1000 to 5700 |
Features |
Can cool high temperature compressed air from compressors down to 40ºC or less and efficiently remove moisture from the air. Cooling equipment is not required for this air cooled type. Maintenance is easy and the running cost is reasonable since this is free from concerns such as water supply cut-off or freezing. |
Water Cooled Aftercooler HAW
Series/CAD | Applicable compressor | Air flow capacity L/min (ANR) |
HAW | 2.2 to 110 kW | 300 to 18000 |
Features |
Can cool high temperature compressed air from compressors down to 40ºC or less and efficiently remove moisture from the air. Stable operation is possible even in an environment with a hightemperature, high moisture and heavy foreign particles for this water cooled type. |
Air Tank AT
Series/CAD | Port size | Capacity (L) |
AT | 1/2 to 4B flange | 100 to 3000 |
Features |
Accumulates the compressed air from compressors, also prevents it from being pulsated, and cools it. |
Air Tank VBAT
Series/CAD | Port size | Tank capacity (L) |
VBAT | 3/8,1/2,3/4 | 5,10,20,38 |
Features |
Compact air tank that can be directly connected with a regulator. Can be used as an independent tank. With a safety valve port. (Optional) |
Refrigerated Air Dryer IDF/IDU
Series/CAD | Applicable compressor | Air flow capacity m3/min (ANR) | |
50 Hz | 60 Hz | ||
IDF1E to 75E | 0.75 to 75 kW | 0.10 to 11.0 | 0.12 to 12.4 |
IDF120D to 240D | 120 to 240 kW | 20.0 to 43.0 | 23.0 to 50.0 |
IDF370B | 370 kW | 54.0 | 65.0 |
IDU3E to 75E | 2.2 to 75 kW | 0.32 to 11.0 | 0.37 to 12.5 |
Features |
Increases the air flow rate by a maximum of 40%*. (SMC comparison) Reduces the power consumption by a maximum of 40%*. (SMC comparison) Refrigerant: R134a (HFC) [IDF1E to 15E/IDU3E to 15E] Improved corrosion resistance with the use of a stainless steel, plate type heat changer. (IDF4E to 75E/IDU3E to 75E) |
Refrigerated Air Dryer / Large Size Series IDFxF
Series/CAD | Applicable compressor | Air flow capacity m3/min (ANR) | |
50 Hz | 60 Hz | ||
IDF100F | 100kW | 16 | 18.8 |
IDF120F | 125kW | 20.1 | 23.7 |
IDF150F | 150kW | 25 | 30 |
Features |
Tolerant of high temperature environment (Ambient temperature 45℃ , Inlet air temperature 60℃) Exhaust heat reduced by 25% Air-cooled type and water-cooled type are available. Stainless steel heat exchanger Refrigerant R407C (HFC) |
Refrigerated Air Dryer/For Use in Europe, Asia, and Oceania IDFAxE
Series/CAD | Air flow capacity m3/h (ANR) | Applicable standard | ||
Outlet air pressure dew point | ||||
3ºC | 7ºC | 10ºC | ||
IDFA3E to 75E | 12 to 660 | 15 to 720 | 17 to 822 | CE |
Features |
EC Directive compliant (with CE marking) Power supply voltage: Single-phase 230 VAC (50 Hz) Refrigerant: R134a (HFC), R407C (HFC); Coefficient of destruction for ozone is zero. Improved corrosion resistance with the use of stainless steel, plate type heat changer (IDFA4E to 75E) |
Refrigerated Air Dryer / Large Size Series / For Use in Europe, Asia and Oceania IDFAxF
Series/CAD | Outlet air pressure dew point | Air flow capacity m3/h (ANR) | Applicable standard | |
For use in Asia and Oceania | IDFA100F-38 | 10℃ | 960 | CE |
IDFA125F-38 | 1210 | |||
IDFA150F-38 | 1500 | |||
For use in Europe | IDFA100F-40 | 3℃ | 860 | |
IDFA125F-40 | 1100 | |||
IDFA150F-40 | 1340 | |||
Features |
Tolerant of high temperature environment. (Ambient temperature 45 ℃ at max., Inlet air temperature 60℃ at max.) Exhaust heat reduced by 25% at max. Power supply voltage : Three-phase 380 VAC (For Asia and Oceania), Three-phase 400 VAC (For Europe) Employs a heat exchanger made of high corrosion-resistant stainless steel. Refrigerant R407C (HFC) |
Refrigerated Air Dryer/For Use in Europe, Asia, and Oceania IDFAxE
Series/CAD | Air flow capacity m3/h (ANR) | Applicable standard | ||
Outlet air pressure dew point | ||||
37ºF (2.8ºC) | 45ºF (7.2ºC) | 50ºF (10ºC) | ||
IDFB3E to 75E | 10 (17) to 300 (510) | 11 (19) to 353 (600) | 12 (20) to 406 (690) | UL, CSA |
Features |
|