Precision Clean Regulator SRP
Series/CAD | Port size | Set pressure (MPa) |
SRP | M5,1/8 | Low pressure type: 0.005 to 0.2 High pressure type: 0.01 to 0.4 |
Features |
High precision low flow consumption stainless steel regulator Bleed air flow 0.5 L/min (ANR) or less (0.2 MPa at outlet pressure) Setting sensitivity: 0.3% F.S. Repeatability: 1% F.S. |
Clean Regulator/Fluororesin Type SRF
Series/CAD | Applicable tubing O.D. | Set pressure (MPa) | ||
Metric size | Inch size | |||
SRF | Integrated with fitting |
φ4 to φ19φ | 1/8 to φ3/4 | 0.02 to 0.4 |
With nut | Fitting size: 2 to 6 | |||
Tube extension |
-- | Tubing O.D. φ1/4 to φ3/4 |
||
Features |
Wetted parts Body: New PFA Diaphragm: PTFE Recommended maximum flow rate: 20 L/min (SRF50) (0.3 MPa at inlet pressure, fluidization) |
Regulator for 2 MPa ARX
Series/CAD | Port size | Set pressure (MPa) | Filtration (μm) |
ARX20 | 1/4,1/8 | 0.05 to 0.85 | |
Features |
Compatible with inlet supply pressure of 2.0 MPa. Ideal for discharge pressure adjustment on a small compressor. Piston type Ideal for the pressure adjustment of air blowing applications |
Direct Operated Regulator for 6.0 MPa (Relieving Type) VCHR
Series/CAD | Type | Port size | Set pressure (MPa) |
VCHR30/40 | Direct operated regulator (Relieving type) |
G3/4,1,11/2 | 0.5 to 5.0 (Inlet pressure 6.0) |
Features |
Service life: 10 million times Improved durability in high pressure environments using a polyurethane elastomer poppet. Uses NSF-H1 approved grease at guide rings (sliding parts). Improved durability using a metal seal type relief valve. Uses special fluororesin seal for sliding parts. Stable unattached response, and not easily affected by pressure. |